[ News ] [ Paper Feed ] [ Issues ] [ Authors ] [ Archives ] [ Contact ]


..[ Phrack Magazine ]..
.:: RSTS ::.

Issues: [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] [ 8 ] [ 9 ] [ 10 ] [ 11 ] [ 12 ] [ 13 ] [ 14 ] [ 15 ] [ 16 ] [ 17 ] [ 18 ] [ 19 ] [ 20 ] [ 21 ] [ 22 ] [ 23 ] [ 24 ] [ 25 ] [ 26 ] [ 27 ] [ 28 ] [ 29 ] [ 30 ] [ 31 ] [ 32 ] [ 33 ] [ 34 ] [ 35 ] [ 36 ] [ 37 ] [ 38 ] [ 39 ] [ 40 ] [ 41 ] [ 42 ] [ 43 ] [ 44 ] [ 45 ] [ 46 ] [ 47 ] [ 48 ] [ 49 ] [ 50 ] [ 51 ] [ 52 ] [ 53 ] [ 54 ] [ 55 ] [ 56 ] [ 57 ] [ 58 ] [ 59 ] [ 60 ] [ 61 ] [ 62 ] [ 63 ] [ 64 ] [ 65 ] [ 66 ] [ 67 ] [ 68 ] [ 69 ] [ 70 ]
Current issue : #32 | Release date : 1990-11-17 | Editor : Crimson Death
Phrack Classic XXXII IndexCrimson Death
Phrack Classic Spotlight featuring Knight LightningCrimson Death & Knight Lightning
Concerning Hackers Who Break Into Computer SystemsDorthy Denning
The Art of InvestigationThe Butler
Unix 'Nasties'Sir Hackalot
Automatic Teller Machine CardsJester Sluggo
A Trip to the NCSCKnight Lightning
Inside the SYSUAF.DAT FilePain Hertz
RSTSCrimson Death
Knight Line I Part 1Doc Holiday
Knight Line I Part 2Doc Holiday
Knight Line I Part 3Doc Holiday
Title : RSTS
Author : Crimson Death
                              ==Phrack Classic==

                     Volume Three, Issue 32, File #9 of 12


                          /-?!?!?!?!?!?!?!?!?!?!?!-\
                         /EZ?!                  ?!AH\
                        /APE?!                  ?!ZAP\
                       /AZHP?!      RSTS/E      ?!EZHA\
                      / ZEAH?!                  ?!PEAZ \
                 [*>RSTS PZA?!        by        ?!HPZ LIVES<*]
                      \ PHEZ?!                  ?!AHEE /
                       \HAPE?!   Crimson Death  ?!ZAPP/
                        \ZHP?!                  ?!EZH/
                         \AH?!                  ?!PE/
                          \-?!?!?!?!?!?!?!?!?!?!?!-/


Ok, ok... Just what you wanted... a file of RSTS!!! Hah...
Well.. One would be suprised on how many RSTS systems are still around
on variuos X.25 networks, not to mention they are soooo much fun!
Here is a little list of some various commands that is good to keep
lying around just to use as a reference of just for you nostaglic type
people like me.  So enjoy, and if you were never involved in hacking
when RSTS was popular, you really missed something.
-------------------------------------------------------------------------------

*ALLOCATE
The ALLOCATE command reserves a physical device for your use during
the current session and optionally establishes a logical name for
the device. Once a device has been allocated, other users cannot access
the device until you specifically deallocate it or log out.  You can
allocate a device only when it is not allocated by another job.

Format

ALLOCATE device-name[:] [logical-name[:]]

Prompts

Device: device-name

See also:  ASSIGN, DEALLOCATE

*APPEND
The APPEND command adds the contents of one or more files to the end
of the file you specify. APPEND is similar in syntax and function to
the COPY command.

Format

APPEND [node::]input-file-spec[,...]  [node::]output-file-spec

Command Qualifiers                  Defaults

   /[NO]LOG                         /LOG
   /[NO]QUERY                       /NOQUERY

Prompts

From: input-file-spec[,...]

To: output-file-spec

See also:  COPY

*ASSIGN
The ASSIGN command lets you relate a logical name to a directory
or to a physical device.  The names you ASSIGN stay in effect until
you log out, or log into another account or until you DEASSIGN the name.

Format

ASSIGN device-name:[[ppn]] logical-name[:]

Prompts

Device: device-name:[[ppn]]

Logical name: logical-name[:]

*BASIC
The BASIC command invokes the BASIC-PLUS or BASIC-PLUS-2 programming
environment, depending on the qualifiers you use and the system's
default. It also prepares RSTS/E for the development of BASIC programs.

Format

BASIC

Command Qualifiers                  Comments

   /BP2                             Invokes the BASIC-PLUS-2
                                    programming environment
   /BPLUS                           Invokes the BASIC-PLUS
                                    programming environment

All subsequent commands are interpreted as BASIC programming commands,
until you type the following command to return to the DCL keyboard
monitor:  DCL <ret>

*CCL
Format

CCL ccl-command

The Concise Command Language (CCL) allows you to enter a command name
rather than type RUN and a program name.

You can type CCL commands directly after DCL's dollar prompt ($).
The format of the CCL command is defined by your system manager.
For details about the use of a CCL command, refer to the
documentation written for your site.

When you are using the DCL Keyboard Monitor, DCL commands take
precedence over CCL commands.  If your system manager gives a CCL
command the same name as a DCL command, you must type the prefix
"CCL" a space, and the CCL command itself.

For example, a CCL command name "DIRECTORY" and the DCL command
"DIRECTORY" may produce different results depending on how the CCL
command works at your site.  To use the CCL version, type:
    $  CCL DIRECTORY <ret>

*COBOL
The COBOL command compiles a COBOL-81 program.  (Only one source file at a
time can be compiled with COBOL-81.)


Format:

COBOL file-spec

Qualifiers                        Defaults

   /[NO]ANSI_FORMAT
   /[NO]CHECK
   /[NO]CROSS_REFERENCE
   /LIST[=listfile]               /NOLIST
   /NOLIST
   /[NO]MAP
   /NAMES=aa                      /NAMES=SC
   /OBJECT[=objfile]              /OBJECT
   /NOOBJECT

Prompts

File:  file-spec

See also:  LINK

*COPY
The COPY command duplicates one or more existing files.
You can use COPY to:

- copy one file to another file
- merge (concatenate) more than one file into a single file
- copy a group of files to another group of files

Format

COPY [node::]input-file-spec[,...]  [node::]output-file-spec

Qualifiers                          Defaults

   /ALLOCATION=n
   /[NO]CONTIGUOUS       (N)
   /[NO]LOG              (N)        /LOG
   /[NO]OVERLAY                     /NOOVERLAY
   /PROTECTION=n
   /[NO]QUERY            (N)        /NOQUERY
   /[NO]REPLACE          (N)        /NOREPLACE

(N) denotes a qualifier that you can use in network operations.

Prompts

From: input-file-spec[,...]

To: output-file-spec

*CREATE
The CREATE command allows you to enter text and save it as a file.

Format

CREATE file-spec

Prompts

File: file-spec

Once you have entered the file-spec, press RETURN and you may start
typing text.  Press <CTRL/Z> when you have finished entering text.

Command Qualifiers

   /ALLOCATION=n
   /[NO]CONTIGUOUS
   /PROTECTION=n
   /[NO]REPLACE

See also:  EDIT

*DEALLOCATE
The DEALLOCATE command releases a device that you reserved for private
use, so that other users may have access to it. (However, DEALLOCATE
does not deassign any logical name you may have set up for the device.)

Format

DEALLOCATE device-name[:]

Command Qualifiers                  Defaults

   /ALL                             none

Prompts

Device: device-name[:]

See also:  ALLOCATE

*DEASSIGN
The DEASSIGN command cancels logical name assignments you made with
the ASSIGN or ALLOCATE commands.

Format

DEASSIGN [logical-name[:]]

Command Qualifiers                  Defaults

   /ALL

Prompts

Logical name: logical-name[:]

See also:  ASSIGN, DEALLOCATE

*DELETE/ENTRY
The DELETE/ENTRY command deletes jobs from the queue that have not
yet begun processing or jobs that are currently being processed.

Format

DELETE/ENTRY=job-number [queue-name[:]]

Command Qualifiers                  Defaults

   /BATCH

Prompts

Queue: queue-name[:]

If you do not specify a queue name, LP0: is assumed.

See also:  PRINT, SUBMIT, DELETE/JOB, SET QUEUE/ENTRY

*DELETE/JOB

The DELETE/JOB command uses the name of a job to cancel a request
to the print or batch queue.

Format

DELETE/JOB=job-name [queue-name[:]]

Command Qualifiers                  Defaults

   /BATCH

For example, if you decide after you make your print request that you
do not want a hard copy of the file after all, you can use the
DELETE/JOB command to withdraw your request.  (If the file is printed
before you enter the DELETE/JOB command, your request is too late.
However, it works if your file is in the middle of printing: the file
stops printing.)

See also:  PRINT, SUBMIT, DELETE/ENTRY, SET QUEUE/JOB

*DELETE
The DELETE command permanently removes a file from your account.

Format

DELETE [node::]file-spec[,...]

Command Qualifiers                 Defaults

   /BEFORE=date
   /CREATED                        /CREATED
   /[NO]LOG                        /LOG
   /MODIFIED
   /[NO]QUERY                      /NOQUERY
   /SINCE=date

Prompts

File: [node::]file-spec[,...]

*DIBOL

The DIBOL command compiles a DIBOL-11 program.  You can include up to
six source file specifications to be compiled into a single object
file with the DIBOL compiler.

Format

DIBOL filespec[,...]

File Qualifiers                  Defaults

   /LIST[=listfile]              /NOLIST
   /NOLIST
   /OBJECT[=objfile]             /OBJECT
   /NOOBJECT
   /WARNINGS                     /WARNINGS
   /NOWARNINGS

See also:  LINK

*DIFFERENCES
The DIFFERENCES command compares two files and lists any sections
of text that differ between the two files.

Format

DIFFERENCES input-file-spec  compare-file-spec

Command Qualifiers                  Defaults

   /IGNORE=BLANKLINES
   /MATCH=size                      /MATCH=3
   /MAXIMUM_DIFFERENCES=n
   /OUTPUT[=file-spec]

Prompts:

File 1: input-file-spec

File 2: compare-file-spec

*DIRECTORY
The DIRECTORY command displays information about files.
Use the TYPE command to display the contents of individual files.

Format

DIRECTORY [node::][file-spec[,...]]

Command Qualifiers                  Defaults

   /BEFORE=date
   /BRIEF                           /BRIEF
   /CREATED                         /CREATED
   /DATE[=CREATED]                  /NODATE
        [=MODIFIED]
        [=ALL]
   /NODATE
   /FULL                            /BRIEF
   /MODIFIED                        /CREATED
   /OUTPUT=outfile
   /[NO]PROTECTION                  /PROTECTION
   /SINCE=date
   /SIZE[=ALLOCATION]               /SIZE=USED
        [=USED]
   /NOSIZE
   /TOTAL


*DISMOUNT
Releases a disk or tape previously accessed with a MOUNT command.
You issue this command before you take the drive off line, or before
you physically dismount the tape or disk.

The DISMOUNT command deallocates the device if it was allocated to
you.  (On some systems, dismounting a disk requires privileges.)
You cannot DISMOUNT a device if there are open files on it.  If you
try, RSTS/E displays the message:

?Account or device in use

Format

DISMOUNT  device-name[:] [label]

Prompts

Device:  device-name[:]

See also:  MOUNT, DEALLOCATE

*EDIT
The EDIT command starts the EDT editor program, which lets
you create and edit text files.

Format

EDIT file-spec

Command Qualifiers                  Defaults

   /COMMAND[=file-spec]             /COMMAND=EDTINI.EDT
   /NOCOMMAND                       /COMMAND=EDTINI.EDT
   /JOURNAL[=file-spec]             /JOURNAL
   /NOJOURNAL                       /JOURNAL
   /OUTPUT[=outfile]                /OUTPUT
   /NOOUTPUT                        /OUTPUT
   /[NO]READ_ONLY                   /NOREAD_ONLY
   /[NO]RECOVER                     /NORECOVER
   /EDT                             /EDT

Prompts

File: file-spec

*FORTRAN
The FORTRAN command compiles up to six FORTRAN source files into
a single object file.

There are three FORTRAN compilers available on RSTS/E:

  Command               Invokes

FORTRAN/FOR            FORTRAN-IV
FORTRAN/F4P            FORTRAN-IV-PLUS
FORTRAN/F77            FORTRAN-77

FORTRAN/F77 is the default, unless your system manager has changed it.

Qualifiers which you may use with FORTRAN-IV are as follows:

Format

FORTRAN/FOR file-spec[,...]

Command Qualifiers

   /CODE:EAE
         EIS
         FIS
         THR
   /[NO]D_LINES
   /[NO]I4
   /[NO]LINENUMBERS
   /LIST[=listfile]
   /NOLIST
   /[NO]MACHINE_CODE
   /OBJECT[=objfile]
   /NOOBJECT
   /[NO]OPTIMIZE
   /[NO]WARNINGS

Qualifiers which you may use with FORTRAN-IV-PLUS or FORTRAN-77
are as follows:

Format

FORTRAN/F4P file-spec[,...]   or FORTRAN/F77 file-spec[,...]

Command Qualifiers                 Defaults

   /[NO]CHECK                      /CHECK
   /CONTINUATIONS=n                /CONTINUATIONS=19
   /[NO]D_LINES                    /NOD_LINES
   /[NO]I4                         /NO14
   /LIST[=listfile]                /NOLIST
   /NOLIST
   /[NO]MACHINE_CODE               /NOMACHINE_CODE
   /OBJECT[=objfile]               /OBJECT
   /NOOBJECT
   /[NO]WARNINGS                   /WARNINGS
   /WORK_FILES=n                   /WORK_FILES=2

Prompts

File:   file-spec[,...]

See also:  LINK

*HELP
Help can be obtained on a particular topic by typing:

     HELP topic subtopic subsubtopic

A topic can have the following format:

1) An alphanumeric string (e.g. a command name, option, etc.)
2) Same preceded by a "/"
3) The match-all symbol "*"

Example:

HELP COPY

The RSTS/E DCL User's Guide contains a complete description of all
DCL commands supported on RSTS/E.

*INITIALIZE
Deletes any data on a tape and writes a new label.

The INITIALIZE command allocates the tape drive if it is not
already allocated.

Format

INITIALIZE device-name[:] [label]

Qualifiers

   /FORMAT=ANSI
   /FORMAT=DOS
   /DENSITY=nnn

Prompts

   Device:  magtape[:]
   Label:   [label]

See also:  MOUNT, DISMOUNT

*LINK
The LINK command links together object files to produce an
executable program.  You can also specify an overlay structure
for the program.

Format

LINK file-spec[,...]

Language Qualifiers                  Comments

Only one of the following may be specified:

   /BASIC or /BP2                   BASIC-PLUS-2
   /COBOL or /C81                   COBOL-81
   /DIBOL
   /F4P                             FORTRAN-IV-PLUS
   /F77                             FORTRAN-77
   /FORTRAN                         FORTRAN-IV
   /RT11                            MACRO/RT11

If no language qualifier is specified, /BASIC (for BASIC-PLUS-2)
is assumed, unless your system manager has changed the default.

    Additional
Command Qualifiers                  Defaults

   /EXECUTABLE[=file-spec]          /EXECUTABLE
   /NOEXECUTABLE
   /[NO]FMS                         /NOFMS
   /MAP[=file-spec]                 /NOMAP
   /NOMAP
   /STRUCTURE
   /[NO]DMS                         /NODMS

Prompts

Files: file-spec

If /STRUCTURE was specified, you will be
prompted for the names of the input files
and overlay structure to use, e.g.,

ROOT files:  file-spec[,...]
Root PSECTs: [PSECT-name[,...]]
Overlay:     [file-spec[,...][+]]

You can specify /STRUCTURE if the program is written in
BASIC-PLUS-2, DIBOL, FORTRAN-IV-PLUS, or FORTRAN-77.  You
cannot specify /STRUCTURE if the program is written in
COBOL, FORTRAN-IV, or MACRO/RT11.

See also:  COBOL, DIBOL, BASIC, MACRO, FORTRAN

*LOGOUT
The LOGOUT command ends your session at the terminal.

Format

[LO]GOUT

Command Qualifiers

   /BRIEF
   /FULL (default)

If you include the /BRIEF qualifier after the LOGOUT command,
RSTS/E ends your session at the terminal without displaying a
message.  If you include the /FULL, or simply type LOGOUT, RSTS/E
displays information about the status of your account.

*MACRO
Invokes a MACRO-11 assembler.  You can include up to six file
specifications with the MACRO command.

On RSTS/E you can use either MACRO/RT11 or MACRO/RSX11.  The default
is MACRO/RSX11 unless your system manager has changed it.

Format

MACRO/RT11 filespec[,...]

        OR

MACRO/RSX11 filespec[,...]

Command Qualifiers

   /LIST[=listfile]
   /NOLIST
   /OBJECT[=objfile]
   /NOOBJECT

File Qualifiers

   /LIBRARY

See also:   LINK

*MOUNT
The MOUNT command prepares a tape or disk for processing by system
commands or user programs. (You do not always have to MOUNT a tape
before using it.) On some systems, mounting a disk requires privilege.

Format

MOUNT device-name[:] [label]

Command Qualifiers                  Defaults

   /[NO]WRITE                       /WRITE

Qualifiers for Tapes                Defaults

   /FORMAT=ANSI
   /FORMAT=DOS
   /FORMAT=FOREIGN
   /DENSITY=nnn

Prompts

Device: device-name[:]
Label: volume-label

See also:  DISMOUNT, INITIALIZE, ALLOCATE

*PRINT
The PRINT command queues a file for printing, either on a default
system printer or on a device you specify. A queue is the list of
files to be printed.

Format

PRINT file-spec[,...]

Command Qualifiers                  Defaults

   /AFTER=date-time
   /FORMS=type                      /FORMS=NORMAL
   /JOB_COUNT=n                     /JOB_COUNT=1
   /NAME=job-name
   /PRIORITY=n
   /QUEUE=queue-name[:]             /QUEUE=LP0:

File Qualifiers                     Defaults

   /COPIES=n                        /COPIES=1
   /[NO]DELETE                      /NODELETE

Prompts

File: file-spec[,...]

See also:  DELETE/JOB, SET QUEUE/JOB

*RENAME
The RENAME command changes the file name or file type of an
existing file.

Format

RENAME old-file-spec[,...]  new-file-spec

Qualifiers                    Defaults

   /[NO]LOG                   /LOG
   /[NO]QUERY                 /NOQUERY
   /[NO]REPLACE               /NOREPLACE
   /PROTECTION=n              /PROTECTION=60

Prompts

From: input-file-spec[,...]

To: output-file-spec

See also:  COPY, DELETE

*REQUEST
The REQUEST command displays a message at a system operator's terminal.

Format

REQUEST message-text

When you use the REQUEST command to send a message to an operator,
the message is displayed at the operator services console.

*RUN

The RUN command runs an executable file.

Format

RUN file-spec

Prompts

Program:  file-spec

*SET HOST
The SET HOST command lets you log into another computer from the
system you first logged into.

Format

SET HOST node[::]

Prompts

Node: node-name

*SET PROTECTION
The SET PROTECTION command specifies the protection code of a file.
You assign a protection code to determine who else, if anyone, can
have access to your files.

Format

SET PROTECTION[=n] [file-spec,...]

Qualifiers

   /DEFAULT
   /[NO]QUERY
   /[NO]LOG

Prompts

Protection code:  n
Files:  file-spec

If you use SET PROTECTION/DEFAULT, RSTS/E assigns the protection
code you specify to all files you create during the current session.
However, do not include a file specification when you use
the /DEFAULT qualifier.

*SET QUEUE/ENTRY
The SET QUEUE/ENTRY command changes the status of a file that is queued
for printing or for batch job execution but is not yet processed by the
system.

Format

SET QUEUE/ENTRY=sequence-number  [queue-name[:]]

    Additional
Command Qualifiers                  Defaults

   /AFTER=date-time                 none
   /BATCH
   /FORMS=type
   /HOLD
   /JOB_COUNT=n
   /PRIORITY=n
   /RELEASE

If you do not specify a queue name, LP0: is assumed.

See also:  DELETE/ENTRY, SET QUEUE/JOB

*SET QUEUE/JOB

The SET QUEUE/JOB command uses the name of a job to modify the status
of a file that is queued for a printer or batch queue.

Format

SET QUEUE/JOB=job-name [queue-name[:]]

Command Qualifiers                  Defaults

   /AFTER=date-time                 None.
   /BATCH
   /FORMS=type
   /HOLD
   /JOB_COUNT=n
   /PRIORITY=n
   /RELEASE

When you submit a batch job or issue the PRINT command, the job is
assigned a name, according to the first input file specification or
the name you specify.  You can use this name to modify the status of
the job in the queue.

See also:  DELETE/JOB, SET QUEUE/ENTRY

*SET TERMINAL
The SET TERMINAL command lets you specify the characteristics of your
terminal. Privileged users can also set the characteristics of other
terminals.

Format

SET TERMINAL [device-name[:]]

Command Qualifiers                  Defaults

   /[NO]BROADCAST                   /NOBROADCAST
   /CRFILL[=n]                      /CRFILL=0
   /[NO]ECHO                        /ECHO
   /[NO]HARDCOPY
   /LA34
   /LA36
   /LA38
   /LA120
   /[NO]LOWERCASE
   /PARITY=EVEN                     /NOPARITY
           ODD
   /NOPARITY
   /[NO]SCOPE
   /SPEED=n
   /SPEED=(i,o)
   /[NO]TAB                         /NOTAB
   /[NO]TTSYNC                      /TTSYNC
   /[NO]UPPERCASE
   /VT05
   /VT52
   /VT55
   /VT100
   /WIDTH=n

See also:  SHOW TERMINAL

*SHOW DEVICES
The SHOW DEVICES command displays the status of devices
that have disks mounted on them or that are allocated to jobs.

See also:  MOUNT, ALLOCATE

*SHOW QUEUE
The SHOW/QUEUE command displays a list of entries in the printer
and/or batch job queues.

Format

SHOW QUEUE [queue-name[:]]

Command Qualifiers

   /BATCH
   /BRIEF

Queue: queue-name[:]

To display the queue of your system's default printer, type:

$ SHOW QUEUE

If there are no files in the queue, RSTS/E prints a message
similar to:

LP0 queue is empty

*SHOW NETWORK
The SHOW NETWORK command displays the systems you can connect
to by the network. If the network is operational, RSTS/E displays
the names of different nodes that your system can access.

Format

SHOW NETWORK

See also:  SET HOST

*SHOW SYSTEM
The SHOW SYSTEM command displays information about use of the
system's resources. Specifically, it displays information about
the status of all jobs, attached and detached, in use on the system.

Format

SHOW SYSTEM

The only difference between SHOW SYSTEM and SHOW USERS is that the
SHOW SYSTEM command includes information about the status of detached
jobs.

See also:  SHOW USERS

*SHOW TERMINAL
The SHOW TERMINAL command displays the characteristics of your
terminal. Most of these characteristics can be changed with a
corresponding option of the SET TERMINAL command. (Users with
privileged accounts can display the characteristics of other terminals.)

Format

SHOW TERMINAL [device-name[:]]

See also:  SET TERMINAL

*SHOW USERS
The SHOW USERS command displays information about the status of
attached jobs on the system.

Format

SHOW USERS

See also:  SHOW SYSTEM

*SUBMIT
The SUBMIT command enters one or more control files for batch processing.

Format

SUBMIT file-spec[,...]

Command Qualifiers                  Defaults

   /AFTER=date-time
   /NAME=job-name
   /PRIORITY=n                     /PRIORITY=128
   /QUEUE=quename

File Qualifiers                     Defaults

   /[NO]DELETE                      /NODELETE

Prompts

File: file-spec[,...]

See also:  DELETE/JOB, SET QUEUE/JOB

*TYPE
The TYPE command displays the contents of a text file (as opposed
to a binary or temporary file).

Format

TYPE [node::]file-spec[,...]

Command Qualifiers                  Defaults

   /OUTPUT=file-spec                /OUTPUT=KB:
   /[NO]QUERY                       /NOQUERY

Prompts

File: file-spec[,...]

To temporarily halt the display of a file, use <CTRL/S>.  To resume
output where it was interrupted, use <CTRL/Q>. (On a VT100 terminal
you can also press the NO SCROLL key to stop and restart output.)

To suppress the display but continue command processing, use <CTRL/O>.
If you press <CTRL/O> again before processing is completed, output
resumes at the current point in command processing.

To stop command execution entirely, press <CTRL/C>.  The use of
<CTRL/C> returns you to DCL command level.

See also:  COPY

------------------------------------------------------------------------------

Hope that this file brought back memories for you guys.  It did for me! 8^]

                                                   Crimson Death
_______________________________________________________________________________
[ News ] [ Paper Feed ] [ Issues ] [ Authors ] [ Archives ] [ Contact ]
© Copyleft 1985-2021, Phrack Magazine.